safety is our main priority

We would prefer to be as transparent as possible and show potential clients that safety is the main priority of the rope access management team here at Rope Task.

Therefore, we have updated this page with current rope access safety method statements, risk assessments and our own work procedures. 

safety is our main priority

We would prefer to be as transparent as possible and show potential clients that safety is the main priority of the rope access management team here at Rope Task.

Therefore, we have updated this page with current rope access safety method statements, risk assessments and our own work procedures. 

Personal Fall Protection

Inspecting of personal fall protection equipment and rope access equipment is essential. So who can inspect rope access and fall protection equipment? Is an IRATA level 3 qualified to do this? 
 
Only a competent person or someone with the necessary ability, knowledge, skill and training can safely inspect fall protectionand rope access equipment. Look at some of the failed items below and see if you could have identified the failures with these items of rope access equipment.
 
 
 
 
The above three photographs show a fall arrest twin tail lanyard that had a small split in the protective plastic wrapped around the shock absorber at the base of the lanyard. Swarf had fallen into the shock absorbing pack of the lanyard, this was embedded in the webbing of the lanyard and not visible until the whole of the protective sleeve was removed. The swarf had started to cut into the fibres of the lanyard. 
 
 
Broken tooth on the wheel of a Petzl ASAP fall arrest safety back-up. This is an instant fail.
 
 
Broken stitching on the sternal attachment point of a fall arrest harness. Instant fail.
 
 
 
 
Loading

Rope Task Limited
Hillside House
5 Brunswick Terrace
Wednesbury
West Midlands WS10 9DA

T: 0121 502 4268
admin@ropetask.com

 

fb.jpgtwitter.jpgyoutube.jpgblog.jpg

from our case studies jaguar land rover

Rope Task were contacted by Freudenberg, a global technology​ group supplying filtration systems to high tech manufacturing plants. The problem they had was the replacement of high-level filters to the ducting systems within the Jaguar Land Rover paint shop. This was not possible using scaffold or MEWP access machines due to conveyor track systems that transport vehicles through the paint shop process...

Links   l  Privacy  l  Site MapDesigned By Nutcracker  l  © 2019 Rope Task Limited

 

Rope Task is rated 5 stars on Facebook based on 5 reviews

approvedkeesafety.png

safecontractor.png

chas.png

CFA logo.jpg

Rope Task Limited
Hillside House  |  5 Brunswick Terrace  |  Wednesbury
West Midlands  |  WS10 9DA
T: 0121 502 4268  |  admin@ropetask.com

fb.jpgtwitter.jpgyoutube.jpgblog.jpg